Need cleanroom doors and factory doors, Please leave it to SUNWIZZ

DR40

Utility-type flush door that supports a wide variety of needs

From inspection port to large door for loading and unloading of the machine , also , until air-tight door for super clean room that require stringent airtightness performance from for out of mere people and luggage , is a flush door for a wide range of needs .

• The air-tight specification of four-side frame cremone handle specification satisfies the A-4 Grade of JIS airtight performance.
• Interior portion of the door is a combination of aluminum frame and styrene foam (or, phenol foam in case of incombustible specification), resulting in extra lightweight.
• Can be unified with entirely the same external appearance from inspection opening to large door.
• A wide variety of options are available, such as window and louver, etc.
• Wholly custom-fabricated in the unit of one millimeter.
• Stainless doorsill is optionally available for three-side bottom-tight specification.

DR40 / Single swing / three-side frame

DR40 / Double swing / four-side frame

DR40 / Inspection opening

DR30 / DR34

Stylish low-profile flush door

Low-profile flush door for inspection opening or exit/entrance door, for the size of so-called "man door". Available models are DR30 that uses latch-type lock and DR34 that allows incorporating electric lock by means of a dedicated outer frame.

• Streamlined appearance due to small prospective dimension and parting dimension.
• Interior portion of the door is a combination of aluminum frame and styrene foam (or, phenol foam in case of non-combustible specification), resulting in extra lightweight.
• A wide variety of options are available, such as window and louver, etc.
• Wholly custom-fabricated in the unit of one millimeter.

DR30 / Single swing / three-side frame

DR30 / Double swing / four-side frame

DR30 / Inspection opening

DR34 / Single swing / three-side frame

External frame dimension		DR30	DR34	DR40
Small door and Inspection opening	Cam latch	W310 - 1260 H370 - 1400	-	W400 - 1400 H400 - 1400
		When W is greater than H, the largest dimension of W is up to 900mm in usable dimension. Aspect ratio is up to H:W = 1:1.75
	F0 series	W310 - 1260 H370 - 1400	W350 - 1260 H550 - 1400	W420 - 1400 H400 - 1400
		When W is greater than H, the largest dimension of W is up to 900mm in usable dimension Aspect ratio is up to H:W = 1:1.5
Single swing	F0 series	W310 - 1260 H370 - 3060*1	W350 - 1260 H550 - 3060*1	W420 - 2080 H420 - 3080*1
		Dimension DW cannot exceed the dimension DH
	Cremone series	-	-	W420 - 2080*2 H420 - 5080
		Dimension DW cannot exceed the dimension DH
Double swing	F0 series	W600 - 2460 H370 - 3060*1	W700 - 2460 H550 - 3060*1	W800 - 4080*2 H430 - 3080*1
		Dimension DW cannot exceed the dimension DH
	Cremone series	-	-	W800 - 4080*2 H430 - 5080
		Dimension DW cannot exceed the dimension DH

1. ^*1In the case that there is no pressure difference between inside and outside of the room. If pressure difference exists, up to H2500mm in usable dimension is available.
2. ^*2Limited to the case when the width of face material used is 1000mm or more. For three-foot width, up to 1880mm for single swing and up to 3680mm for double swing are available.

Model	DR30	DR34	DR40
Door thickness (Overall thickness)	31mm (36mm)		41mm (47mm)
Opening form	Small door, Single swing, Master-slave opening, Double swing
Outer frame	Aluminum profile (Alumite, clear finish)
Framing	Aluminum framing
Face material	Metal sheet 0.4 - 0.6mm (Steel, aluminum, stainless, or supplied material)
Core material	Styrene foam Phenol foam		Styrene foam Paper honeycomb Phenol foam Ceramic honeycomb
Packing	EPDM rubber
Hinge	Stainless flag-type hinge*1
Sliding rubber	Polyester base fabric painted with fluorine resin
Lock system*3	Inspection opening*2
	One-side handle: Zinc die-cast cam latch handle
	Both-side handle: Stainless hermetically-sealed handle
	F0 series
	Round knob: HMW MAW (MIWA LOCK) / UC-Q,AS-Q(GOAL)
	Lever lock: LA52 (MIWA LOCK) / LG-NU(GOAL)
	Case lock: MACC HMCC (MIWA LOCK) / UCC,ASC(GOAL)
	-	Round knob electric lock: AUR(T)W (MIWA LOCK) / EUR(T)-Q(GOAL)
	-	Lever electric lock: AUR(T)52 (MIWA LOCK) / EUR(T)-NU(GOAL)
	-		Cremone series
	-		53 series, H83V (Shibutani)
	-		Electric lock EE55, H83V (Shibutani)
Door closer*4	Ryobi,NewStar
Window*4	FX30(Single), FW30(Multiple layer)		FX40(Single), FW40(Multiple layer)
Louver*4	GA30		GA40

1. ^*1Can be optionally changed to automatic hinge or clean hinge.
2. ^*2Inspection opening specification is not available for DR34.
3. ^*3Listed items are standard products. Please feel free to consult us for other types of locks.
4. ^*4Door closer, window, and louver can be added optionally.