Need cleanroom doors and factory doors, Please leave it to SUNWIZZ

DTH40

Convenient combination of detachable machine hatch with swing door

Detachable machine hatch is used for a large opening that is used only several times or once a year. It is a blended door convenient for the following cases: a door for entrance and exit of people can only be installed at a certain place due to the room layout, and a door for entrance and exit of people needs to be installed at a certain place. A swing door is attached either on the right end or left end for a structural reason. The swing door can be removed from the hinge if it is opened more than 90 degrees. Therefore, the swing door can also be positioned as a machine hatch, resulting in securing a large opening.

• Superb airtightness as it is designed based on the structure of DR40 that satisfies the A-4 grade of airtightness performance. ^*
  (In the case of four-side frame cremone specification)
• Both the swing door and detachable machine hatch are very light due to the combination of aluminum frames and styrene foam (phenol foam in case of heat-insulating incombustible specification) inside the door.
• Various options are available, such as window and louver.
• Fully custom-fabricated in the unit of one millimeter.

1. ^*Airtightness performance test has not been conducted for DTH40 as a single unit.

DTH40 / Three-side frame

DTH40 / Four-side frame

Overall	Swing door portion		Machine hatch portion
W680 - H420 - 4580	F0 series	DW360 - 2010*1 DH376 - 3016*3	DW250 - *2
	Cremone series	DW360 - 2010*1 DH376 - 4516

1. ^*W and H indicate the frame outer dimension, and DW and DH indicate the dimension of the door itself or transom panel itself.
2. ^*1Limited to the case when the width of face panel used is 1000mm or wider.In case of 900mm width, DW is up to 1810.
3. ^*2Dimension DW per each panel.
4. ^*3In case there is no pressure difference between inside and outside of the room.If pressure difference exists, up to DH2536mm is available.

Model	Swing door portion		Machine hatch portion
	F0 series	Cremone series
Door thickness (Overall thickness)	41mm (47mm)
opening form	Single opening		Single piece, Two pieces, Three pieces, etc.
Outer frame, door frame	Aluminum framework (alumite, clear finish)
Framework	Aluminum framework
Face material	Metal plate 0.4 - 0.6mm (Steel, aluminum, stainless, or supplied material)
Core material	Styrene foam Paper honeycomb Phenol foam Ceramic honeycomb
Packing	EPDM rubber		Elastomer
Hinge	Stainless flag-type hinge *1		-
Sliding rubber	Polyester base fabric painted with fluorine resin		-
Shut-in handle	-		Cam latch shut-in handle (zinc die-cast)
Handle or lock system *2	Round knob: HMW MAW (MIWA LOCK) / UC-Q,AS-Q(GOAL) Lever lock: LA52 (MIWA LOCK) / LG-NU(GOAL) Case lock: MACC HMCC (MIWA LOCK) / UCC,ASC(GOAL) Round knob electric lock: AUR(T)W (MIWA LOCK) / EUR(T)-Q(GOAL) Lever electric lock: AUR(T)52 (MIWA LOCK) / EUR(T)-NU(GOAL)	53 series, H83V(Shibutani) Electric lock EE55, H83V(Shibutani)	Exposed handle(stainless SUS304)
Door closer *3	Ryobi, NewStar		-
Window *3	FX40(Single), FW40(Multiple layer)
Louver *3	GA40

1. ^*1Can be changed optionally to "auto hinge" or "clean hinge."
2. ^*2Listed items are standard products. Please feel free to consult us for other types of locks.
3. ^*3Door closer, window, and louver can be added optionally.