Need cleanroom doors and factory doors, Please leave it to SUNWIZZ

DTV40

Two-in-one, machine hatch for carrying in/out large equipment and door for daily use

A door with a certain height is required for an opening through which a tall machine is carried in or out. Still, a larger sized door is not needed as it is usually used for entrance and exit for people and carts. In the case of using it for cleanrooms, a very large door will pose a problem of increased air movement when the door is opened and closed. In such cases, a convenient choice is the blended door DTV40 that is equipped with a detachable machine hatch on the upper part of the swing door. This door features the advantages of both DR40 and TH40. It is Sunwizz's unique door that "leaves nothing to be desired".

• Superb airtightness as it is designed based on the structure of DR40 that satisfies the A-4 grade of airtightness performance. *
  (In the case of four-side frame cremone specification)
• Both the door portion and transom panel portion are very light due to the combination of aluminum frames and paper honeycomb or styrene foam (phenol foam in case of heat-insulating incombustible specification) inside the door.
• The transom panel portion is of a safety design that securely supports by means of rigid stainless angles.
• Various options are available, such as window and louver.
• Fully custom-fabricated in the unit of one millimeter.

1. ^*Airtightness performance test has not been conducted for DTV40 as a single unit.

DTV40 / Single swing / three-side frame

DTV40 / Double swing / Four-side frame

	Overall	Transom panel portion	Swing door portion
Single opening	W420 - 2080*1 H860 - 3080	DW356 - 2016 HH420 - 650	DW420 - 2080 DH376 - 2610*2
	Dimension DW cannot exceed dimension DH.
Double opening	W800 - 2580 H860 - 3080	DW736 - 2516 DH420 - 650	DW800 - 2580 DW376 - 2610*2
	Dimension DW cannot exceed dimension DH. The minimum dimension on the slave side is DW285.

1. ^*W and H indicate the frame outer dimension, and DW and DH indicate the dimension of the door itself or transom panel itself.
2. ^*1Limited to the case when the width of face panel used is 1000mm or wider.
3. ^*2In the case that there is no pressure difference between inside and outside of the room.If pressure difference exists, up to DH2536mm is available.

Model	DTV40
	Swing door portion	Transom portion
Door thickness (Overall thickness)	41mm (47mm)
Opening form	Single opening, Master-slave opening, Double opening	-
Outer frame, Door frame	Aluminum framework (alumite, clear finish)
Framework	Aluminum framework
Face material	Metal sheet 0.4 - 0.6mm (Steel, aluminum, stainless, or supplied material)
Core material	Styrene foam Paper honeycomb Phenol foam Ceramic honeycomb
Packing	EPDM rubber	Elastomer
Hinge	Stainless flag-type hinge *Can be changed to auto hinge as an option.
Sliding rubber	Polyester base fabric painted with fluorine resin
Shut-in handle	-	Cam latch shut-in handle (zinc die-cast)
Handle	-	Exposed handle (stainless SUS304)
Lock system	-	F0 series
		Round knob: HMW MAW (MIWA LOCK) / UC-Q,AS-Q(GOAL)
		Lever lock: LA52 (MIWA LOCK) / LG-NU(GOAL)
		Case lock: MACC HMCC (MIWA LOCK) / UCC,ASC(GOAL)
		Round knob electric lock: AUR(T)W (MIWA LOCK) / EUR(T)-Q(GOAL)
		Lever electric lock: AUR(T)52 (MIWA LOCK) / EUR(T)-NU(GOAL)
		Cremone series
		53 series, H83V (Shibutani)
		Electric lock EE55, H83V (Shibutani)
Window*1	FX40(Single), FW40(Multiple layer)
Louver *1	GA40

1. ^*1Window and louver can be added optionally only to the door portion.