Need cleanroom doors and factory doors, Please leave it to SUNWIZZ

PW

FIX window exclusively for insulation glass, using resin frame that offers superior heat-insulating property

All-resin insulation-glass FIX window. The spacers for the insulation glass used are also resin-made, so as to enhance the heat-insulating property. PW 40 is for panel thicknesses of 40 to 44 mm, and PW50 is for 50mm. The insulation glass to be used can be specified according to intended use, from regular 2-piece pair glass, multiple glass using three or four pieces of glass, and heat-generating insulation glass with heater, etc.

• Made of resin with low thermal conductivity to prevent condensation on the frame. ^*
• Foundation around the opening is not required, as it is fixed by pulling in the window frame with each other.
• On-site glass work is not required, as the face plate is factory-fixed before delivery.
• Supports application of various films as an option.
• Fully custom-fabricated in the unit of one millimeter.

1. ^*Condensation may occur depending on the condition.

PW

Model	PW40,  PW50
Effective dimension	W172*1 - 2000 H172*1 - 2000
	Up to 3 square meter in effective area

1. ^*1Accuracy of the stop may be lower in the frame outer dimension is less than 350mm.

Model	PW40	PW50
Frame	ABS resin framework (silver color)
Frame configuration	One-side flat, One-side stepped
Supported panel thickness	40mm - 44mm	50mm
Face plate thickness	19mm - 46mm
Face plate fixing method	Silicone caulking
Fixing method on panel	Sub body is fixed with screws (foundation not required)