Sliding framed door

SK40

Light-weight aluminum framed door that supports large-sized doors

This is an aluminum framed sliding door exclusively for large-sized doors for carrying in/out large equipment. Full-face see-through is available for achieving large-sized doors with the largest-ever window. The floor surface of three-side frame specification does not have any protruding objects such as rails, allowing smooth entrance and exit of forklifts and carts. This door enables you to achieve smart-looking large-sized doors with a wide variety of functionalities.

This door achieves astonishingly large dimension of H5000mm in effective dimension, while maintaining smart-looking appearance that is unique to framed doors (manual and automatic only).
Free selections from among with or without center frame, combinations of face plates and louvers.
Convenient when large-sized window and/or louver is desired, such as full-face window and full-face louver.
Simple installation as insertion of foundation into panel is not required when attaching opening frame and rails.
The bellows rubber around the opening is equipped with adjusting function that allows adjustment after
Standard specification enables effective space utilization as it does not leave remaining gap.
Fully custom-fabricated in the unit of one millimeter.

SK40 / Single sliding

SK40 / Double sliding

SK30

Smart-looking, light-weight aluminum framed door

This is a man-door-sized narrow-framed aluminum door. Appearance is very smart as the vertical and horizontal frames are assembled with 45 degree diagonal stops. Three types of open/close mechanisms are available: manual, self-closing, and automatic. It allows free customization depending on usages and preferences, such as full-face glass, full-face louver, or dividing between the upper and lower portion by adding a center frame.

Convenient when large-sized window and/or louver is desired, such as full-face window and full-face louver.
Very light weight due to the combination of only aluminum frames and face plates.
Streamlined appearance due to small perspective dimension and parting dimension of the frame.
Free selections from among with or without center frame, combinations of face plates and louvers.
Simple installation as insertion of foundation into panel is not required when attaching opening frame and rails.
The bellows rubber around the opening is equipped with adjusting function that allows adjustment after installation.
Standard specification enables effective space utilization as it does not leave remaining gap.
Fully custom-fabricated in the unit of one millimeter.

SK30 / Single sliding

SK30 / Double sliding

Scope of fabrication(unit = mm)

Frame opening dimension^*1		SK30	SK40
Manual	Single sliding	W500 - 1200 H320 - 2500	W800 - 2500 H1400 - 5000
	Single sliding	Aspect ratio W:H is up to 1:5. (Please use a floor-mount stopper in case of exceeding 1:3) Air cushion cannot be attached to doors of less than W600. Please understand that, if the rail is divided, wobbling is generated when suspension pulleys are running on the joint section.
	Double sliding	W1000 - 2400 H320 - 2500	W1600 - 5000 H1400 - 5000
	Double sliding	Aspect ratio W:H is up to 1:2.5. (Please use a floor-mount stopper in of exceeding 1:1.5) Air cushion cannot be attached to doors of less than W1280. Sanitary cover (slanted cover) is not supported if dimension W exceeds 4000.
Self-closing^*1	Single sliding	W500 - 1200^1 H320 - 2500^1	W800 - 2000^1 H1400 - 5000^1
	Single sliding	Aspect ratio W:H is up to 1:5. (Please use a floor-mount stopper in case of exceeding 1:3) Delivery with the rail divided is not available. Some sizes may not be supported even in the case of manufacturable dimension, depending on the use environment and/or door weight.
	Double sliding	W1000 - 2400^1 H320 - 2500^1	W1600 - 4000^1 H1400 - 5000^1
	Double sliding	Aspect ratio W:H is up to 1:2.5. (Please use a floor-mount stopper in case of exceeding 1:1.5) elivery with the rail divided is not available in case of interlocking specification. Only non-interlocking specification is available. Some sizes may not be supported even in the case of manufacturable dimension, depending on the use environment and/or door weight.
Automatic	Single sliding	W600 - 1200 H320 - 2500	W800 - 2850 H1400 - 5000
	Single sliding	Aspect ratio is up to W:H = 1:4.
	Double sliding	W1100 - 2400 H320 - 2500	W1600 - 5000 H1400 - 5000
	Double sliding	Aspect ratio is up to W:H = 1:2.

^*1Effective dimension

Specification

Model	SK30	SK40
Door thickness (Overall thickness)	36mm	47mm
Opening form	Manual, Self-closing, Automatic
Outer frame	Aluminum framework (Alumite, clear finish)
Assembling method	Thrust-in structure
Face material	Opaque: Laminated aluminum plate Transparent: Glass, Polycarbonate, Acrylic, Polyvinyl chloride, PET, etc.
Catch	Front side: Exposed handle (stainless SUS304)
Catch	Back side: Hook (stainless SUS304)	Back side: Flush-type square catch (stainless SUS304)
Guide block	Mounting stay: Stainless Guide block: Super-high-molecular polyethylene
Sliding rubber Bellows rubber	Polyester base fabric painted with fluorine resin
Door end safety rubber	-	Elastomer
Louver^*1	Wing configuration: Angular / One-side sloping Aperture ratio: 30% / 50%
Lock system^*1	Please consult with us	Miwa Lock UD lock^*2 (with remaining closing gap)