Double sliding framed door

WSK30

Full-face see-through is available, stylish aluminum framed double sliding door

Stylish double sliding door that combines the functionality of double sliding door that enables effective utilization of limited space with the functionality of framed door that enables full-face see-through. Three types are available: manual, self-closing, and automatic.

Convenient when large window and/or louver is desired, such as full-face window and full-face louver.
Very light weight due to the combination of only aluminum frame and face plate.
Streamlined appearance due to small perspective dimension and parting dimension.
Freely selectable combinations: with or without center sash bar, face plates, or louvers
Simple installation as foundation embedding into the panel is not required when attaching opening frame and rail.
The sliding rubber around the opening is equipped with adjusting function that allows adjusting after installation.
Standard specification enables effective space utilization as it does not leave remaining gap.
Fully custom-fabricated in the unit of one millimeter.

WSK30 / Single sliding

WSK30 / Double sliding

Frame opening dimension		WSK30
Manual	Single sliding	W890 - 2450 H340 - 2500
	Single sliding	Dimension DH cannot exceed four times the dimension DW. Maximum rail length is L = 5000.
	Double sliding	W1880 - 4900 H340 - 2500
	Double sliding	Dimension DH cannot exceed four times the dimension DW. Maximum rail length is L = 6000.
Self-closing	Single sliding	W890 - 2450 H340 - 2500
	Single sliding	Dimension DH cannot exceed four times the dimension DW. Some sizes may not be supported even in the case of manufacturable dimension, depending on the use environment and/or door weight.
	Double sliding (Non-interlocking)	W1880 - 4900 H340 - 2500
	Double sliding (Non-interlocking)	Dimension DH cannot exceed four times the dimension DW. Some sizes may not be supported even in the case of manufacturable dimension, depending on the use environment and/or door weight.
Automatic	Single sliding	W890 - 2450 H340 - 2500
	Single sliding	Dimension DH cannot exceed four times the dimension DW.
	Double sliding	W1880 - 4900 H340 - 2500
	Double sliding	Dimension DH cannot exceed four times the dimension DW.

Model	WSK30
Door thickness	36mm
Opening form	Manual, Automatic Self-closing(Hashida Giken only)
Opening frame	Aluminum framework (Alumite, clear finish)
Assembling method	Piece assembling by stop cutting
Face material	Opaque: Laminated aluminum plate Transparent: Glass, Polycarbonate, Acrylic, Polyvinyl chloride, PET, etc.
Catch	Front side: Exposed handle (stainless SUS304) Back side: Flush-type square catch (stainless SUS304)
Guide block	L-shaped mounting stay: Stainless Guide block: Super-high-molecular polyethylene
Sliding rubber Bellows rubber	Polyester base fabric painted with fluorine resin
Louver^*1	Wing configuration: Angular / One-side sloping Aperture ratio: 30% / 50%
Lock system^*1	Please consult with us

^*1Lock system, and louver can be added optionally.
^*2In principle, 'Automatic' does not support 'lock system'.

Need cleanroom doors and factory doors, Please leave it to SUNWIZZ

WSK30

Full-face see-through is available, stylish aluminum framed double sliding door

Scope of fabrication(unit = mm)

Specification