1. HOME
  2. HOME
  3. Product
  4. Double sliding framed door

Double sliding framed door

WSK30 Full-face see-through is available, stylish aluminum framed double sliding door

Stylish double sliding door that combines the functionality of double sliding door that enables effective utilization of limited space with the functionality of framed door that enables full-face see-through. Three types are available: manual, self-closing, and automatic.

  • Convenient when large window and/or louver is desired, such as full-face window and full-face louver.
  • Very light weight due to the combination of only aluminum frame and face plate.
  • Streamlined appearance due to small perspective dimension and parting dimension.
  • Freely selectable combinations: with or without center sash bar, face plates, or louvers.
  • Simple installation as foundation embedding into the panel is not required when attaching opening frame and rail.
  • The sliding rubber around the opening is equipped with adjusting function that allows adjusting after installation.
  • Standard specification enables effective space utilization as it does not leave remaining gap.
  • Fully custom-fabricated in the unit of one millimeter.

WSK30 / Single sliding

WSK30 / Double sliding

Scope of fabrication (unit = mm)

※You can flick left and right to view.
Frame opening dimension WSK30
Manual Single sliding W890 - 2450
H340 - 2500
Dimension DH cannot exceed four times the dimension DW.
Maximum rail length is L = 5000.
Double sliding W1880 - 4900
H340 - 2500
Dimension DH cannot exceed four times the dimension DW.
Maximum rail length is L = 6000.
Self-closing Single sliding W890 - 2450
H340 - 2500
Dimension DH cannot exceed four times the dimension DW.
Some sizes may not be supported even in the case of manufacturable dimension, depending on the use environment and/or door weight.
Double sliding
(Non-interlocking)		 W1880 - 4900
H340 - 2500
Dimension DH cannot exceed four times the dimension DW.
Some sizes may not be supported even in the case of manufacturable dimension, depending on the use environment and/or door weight.
Automatic Single sliding W890 - 2450
H340 - 2500
Dimension DH cannot exceed four times the dimension DW.
Double sliding W1880 - 4900
H340 - 2500
Dimension DH cannot exceed four times the dimension DW.

Specification

※You can flick left and right to view.
Model WSK30
Door thickness 36mm
Opening form Manual, Automatic
Self-closing(Hashida Giken only)
Opening frame Aluminum framework (Alumite, clear finish)
Assembling method Piece assembling by stop cutting
Face material Opaque: Laminated aluminum plate
Transparent: Glass, Polycarbonate, Acrylic, Polyvinyl chloride, PET, etc.
Catch Front side: Exposed handle (stainless SUS304)
Back side: Flush-type square catch (stainless SUS304)
Guide block L-shaped mounting stay: Stainless
Guide block: Super-high-molecular polyethylene
Sliding rubber
Bellows rubber		 Polyester base fabric painted with fluorine resin
Louver *1 Wing configuration: Angular/One-side sloping
Aperture ratio: 30%/50%
Lock system *1 Please consult with us

*1 Lock system, and louver can be added optionally.

*2 In principle, 'Automatic' does not support 'lock system'.